Guangdong Litong Environmental Protection Machinery Co., Ltd.

  TZ1600-30 Single-Coating Aluminium Coating Line Coating line features: This is an economic type of coating line apply to most ACP top/bottom coil coating. Product thickness 0.1mm~0.5mm is common used for ACP. This coating line can also produce some gauges of roofing coils. With a rewinding line, this coating line meets basic requirements from raw material to finished product of coating factory. The line requires a minimum 70m×12m×7m workshop dimension, which suits most factories in limited dimension. Application: For coating top coil and bottom coil of ACP(Aluminium Composite Panel) Advantage: Economical and easy to use, small dimension workshop needed   1. Main parameters of coating line   Material parameter Thickness: 0.1 ～ 0.5mm Width: 1600mm Outer diameter OD(max): Φ1400mm Inner diameter: Φ150mm, Φ405mm Bobbin material: Steel or paper Inverval-layers deviation tolerence: ≤0.8 mm (Excluding the bottom 5 layers and exterior...

  Aluminium Coil Coating Line - Litong Why is it necessary to coated aluminium coil or plastics with an aluminium coating? To prevent corrosion of items as well as aesthetics. The first continuous  coil painting line , invented by Joseph Hunter, laid the groundwork for the subsequent development of industrial automation. Smalls says it was a very cost effective way of painting metal. So what are the main equipment and process of aluminum coil coating line ? I. Main coating equipment 1. Terminal equipment and aluminum coil coaters. 2. Metal treatment. 3. Primer/topcoat applicator. 4. Air cooling and water quenching; air cooling is used to reduce the strip PMT (peak metal temperature) to about 150-170 degrees Celsius. 5. Process control. 6. Tension straightener; this is where a high degree of control is required and aluminum color coated coils can be as light as 0.18mm (equivalent to 0.06mm steel). 7. Chemical coating machine. 8. Main/finish drying box. 9. Hot/cold lam...